Put the hose connection and drain where you want them. but the drain need to be one corner o you can et the whole thing on an angle to drain fr winter. my firt set only had one drain and ice shattered the other tube.
Drill the appropriate sized hole for your micro heads at the 4 outer junction then thread it with the correct size tape and carefully screw in the heads
Or if your using a manifold put it in the center and run your soaker tubing where you want it. you will need to buy the correct part to connect the manifold to the PVC in the center.
You'll Need : a 1/2" PVC tubing and cut it into, 18x 10-3/4" lengths, 6x 9-1/4" lengths, 2x 2-2/1" lengths.
via : square foot
Drill the appropriate sized hole for your micro heads at the 4 outer junction then thread it with the correct size tape and carefully screw in the heads
Or if your using a manifold put it in the center and run your soaker tubing where you want it. you will need to buy the correct part to connect the manifold to the PVC in the center.
You'll Need : a 1/2" PVC tubing and cut it into, 18x 10-3/4" lengths, 6x 9-1/4" lengths, 2x 2-2/1" lengths.
- 9. cross connectors
- 2. 90° Elbows
- 1. PVC Reducer Male Adapter 3/4" MNPT x 1/2” Slip.
- 2. Male Slip Adapter 1/2" x 1/2"
- 2. 1/2" Threaded cap.
- 9. Slip on PVC caps.
via : square foot